LGA775 PinMod Guide

• jcmarfilph on May 05, 2007 09:19 AM

  Warning!!!
  Do this at your own risk. I am not liable for any damage in your processor or mobo. This mod may permanently void your mobo and processor's warranty.
  

  
  
  This guide is very useful if your mobo has no VCore or has limited FSB adjustment and you wanna squeeze out the best in your Pentium D, Celeron D, Pentium E, Conroe-L and Core2Duo proccy.
  
  I just got bored today and took off my Celeron D 331 out of the mobo and try the PinMod Guide of Shamino from VRZone.
  
  <click here for link>
  
  The arrow on the Guide is in the wrong position so it should be on the left side
  
  
  
  
  I am hoping to pump my Celey upto 4Ghz so there you go.
  
  
  Here are the screenies
  
  Initial VCore
  
  
  
  
  Actual Chip with PinMod
  
  
  
  
  New VCore
  
  
  
  
  
  
  
  What materials do you need?
  - Aluminum Tape or Conductive Pen or Paint or Defogger Kit
  - Electrical Tape
  - Scissor
  - Tweezer
  - Ohmmeter
  
  Steps
  - Cover teh single point with Electrical Tape
  - Connect the line with your choice of conductive material
  
  Too bad my mobo cant go higher than what it can do at default vcore. =( Damn I missed my ASRock Twins.
  
  <click here for link>
  
  
  
  
  I guess, ill just charge this to experience. wooot!
  
  Here is the link to Core2Duo VCore PinMod Guide by Shamino
  
  <click here for link>
  
  

  Im gonna do the Core2Duo mod soon in my E4300 or E4400 ^_^
  

  
  
  Did I say soon? too soon huh.. ^_^
  
  I did the 1.4V VID Mod to my E4300 (stock is 1.325V) and heres what I have got...
  
  
  
  
  <click here for link>
  
  
  
  Our very own TPCer Hoyas found this nifty utility to display the actual layout of your desired VID Mod for C2D proc.
  
  <click here for link>
  
  Life made easy.. thanks Hoyas!
  
  
  Pentium E2180 VID Mod
  
  
  
  
  And heres a yummy one for you.
  
  1066 Core2Duo BSEL Mod
  - Changing the 800Mhz to 1066Mhz Bootstrap (FSB)
  - Applicable to E2xxx/E4xxx Core2Duo, Celeron 4xx (Conroe-L), Pentium D 800 FSB
  - Mobo should have support for 1066 FSB
  
  
  
  
  
  
  
  
  
  Ive used aluminum tape and created an inverted "C" shape like this
  
  
  
  
  top is the conductive part (fold teh tip) and bottom is the adhesive part...
  
  You can also try not to fold the tip if you encounter any problem.
  
  
  And heres the Core2Duo 1333 Mod
  - applicable to E6xxx/E7xxx Core2Duo only
  - mobo should support 1333 (333) FSB
  
  
  
  
  And this is the 800 -> 1333 Mod
  
  
  
  
  Upcoming Mod
  
  Celey D 3xx
  
  533 -> 800 BSEL Mod.. ^_^
  
  I just read the Celey 3xx Datasheet and it looks feasible
  
  
  
  
  stay tuned ^_^
  
  ooops.. Success!
  
  
  
  
  
  
  
  
  
  
  533 -> 667 FSB Mod
  
  
  
  
  You can do it using "]" or just straight pattern.
  
  or try this one....
  
  
  
  
  533 -> 667 FSB Mod Result of my Celeron D 331 on Jetway mobo...
  
  
  
  
  <click here for link>
  
  
  
  
  ^_^
  
  
  The PinMod Club!!!
  
  

  
  
  1. jcmarfilph - VID, BSEL Mod - Celeron D 331, E4300, E2140, Celeron 420 - ASRock Conroe1333-DVI/H R2 <click here for link><click here for link><click here for link><click here for link>/Jetway P4M9MP <click here for link> / Biostar P35 <click here for link><click here for link>
  2. Hoyas - BSEL - E4300/E4500 - ASRock Conroe1333 - tinamad magpost eto lolz...
  3. Varia - BSEL - E4300, E2140, E2160 - Foxconn P9657AA-8KRSH - <click here for link>/ASRock Conroe1333-D667 - <click here for link>/ECS G31T-M - <click here for link>/XFX MG-610I-7059 - <click here for link>
  4. Yelrah - BSEL - Celeron D 420 - ASRock Conroe1333 D667 <click here for link>/Intel D946GZIS <click here for link>
  5. Jestersage - BSEL - E4300 - ASRock Conroe1333 D667 - <click here for link>
  6. Chauza - BSEL - E2140, E4400 - ASRock Conroe1333 D667 - <click here for link>/<click here for link>
  7. episioco_homer - BSEL - E2140 - ASRock Conroe1333 D667 - <click here for link>
  8. Jeffrey - BSEL, VID - E2140, E2180, E5200 - ASRock Conroe1333-D667 - <click here for link><click here for link><click here for link>
  9. paui - BSEL - E4300, E2180 - Emaxx 945GC-1066 - <click here for link><click here for link>
  10. xbong28 - BSEL - Celeron D 420, E1200 - Asus P5GC-MX - <click here for link>/Asus p5vd2 vm - <click here for link>/ASRock Conroe1333-D667 - <click here for link>/ASRock Wolfdale 1333-D667 - <click here for link>
  11. j_friends24 - BSEL - Celeron D 420 - ASRock Conroe1333-D667 - <click here for link>
  12. bloodyvamp - BSEL - Celeron D 331 - ECS P4M800PRO-M - <click here for link>
  13. isaias19 - BSEL - E4300 - Jetway775gt2-log - <click here for link>
  14. LowRyderz - VID - PD 930 - Asus P5L-MX - <click here for link>
  15. regie - BSEL - E2160 - Gigabyte 94GCMX-S2 - <click here for link>
  16. AC - BSEL, VID - E4500, E7200 - ASRock Conroe1333-D667/Wolfdale1333-D667 - <click here for link>/<click here for link>
  17. Tsumekiri - BSEL, VID - E2160 - ASRock Conroe1333-D667 - <click here for link>/Asus P5N32-SLI PREMIUM - <click here for link>
  18. mitch002 - BSEL, VID - E2160 - ASRock Conroe1333-D667 - <click here for link>
  19. budgeted - BSEL - E2160 - ASRock Wolfdale1333-D667 - <click here for link>
  20. nievz - BSEL, VID - E4500 - ASRock Conroe1333-D667 - <click here for link>
  21. newcomer - BSEL, VID - E2160 - ECS G31T-M - <click here for link>
  22. synovial - BSEL - E4300, E2140 - Foxconn P4M890 - <click here for link>/ASRock Wolfdale1333-D667 - <click here for link>
  23. ntoskrnl - BSEL - E2160 - Gigabyte 94GCMX-S2 - <click here for link>
  24. bauwow - BSEL - E4300 - ASRock Conroe1333-D667 - <click here for link>
  25. sprechenzi - BSEL - E2160 - ASRock Wolfdale1333-D667 - <click here for link>
  26. iyakin22 - BSEL - E2160 - ASRock Wolfdale1333-D667 - <click here for link>
  27. rimax - BSEL - E2160 - ASRock Wolfdale1333-D667 - <click here for link>
  28. jedz2005 - BSEL - E2140 - ASRock Conroe1333-D667 - <click here for link>
  29. nand2k6 - BSEL, VID - E2140, E4300 - ASRock Wolfdale1333-D667 - <click here for link><click here for link>
  30. lioma - BSEL - E1200 - ASRock Wolfdale1333-D667 - <click here for link>
  31. battousai21 - BSEL,VID - E4500 - ASRock Wolfdale1333-D667 - <click here for link>
  32. tranceemman - BSEL - E2140 - ASRock Conroe1333-D667 - <click here for link>
  33. clarence16 - BSEL - E1200 - Inno3D SL7N73VM - <click here for link>
  34. yborann - BSEL/VID - E2140 - ECS G31I-M - <click here for link>
  35. bagokz - BSEL - Celeron 420 - MCP73 610i - <click here for link>
  36. kaldoy - BSEL/VID - P4 641, E5200 - MSI MS-7255 - <click here for link> / ECS G31T - <click here for link>
  37. harry23_lim - BSEL - E4300 - ECS P965T-A - <click here for link>
  38. Iori - BSEL - E2140 - ASRock Conroe1333-D667 - <click here for link>
  39. Chaos - BSEL - E2140 - ASRock Wolfdale1333-D667 - <click here for link>
  40. Redman - BSEL - E2180 - Gigabyte G31 - <click here for link>
  41. Winzki - BSEL - E4500 - Intel D945GCNL - <click here for link>
  42. germtangc - BSEL - E2160 - J&W IP35-PRO - <click here for link>
  43. tetris_0011 - BSEL - Celeron 420 - ASRock 4CoreDX90-VSTA - <click here for link>
  44. AudioSenseCD - BSEL - P4 506, E5200 - Unknown Board - <click here for link>/ECS P35T-A - <click here for link>
  45. jomalmighty - BSEL - E2140 - Foxconn 45CMV - <click here for link>
  46. grafittione - BSEL - E2160 - ECS 671T-M - <click here for link>
  47. Mil - BSEL - E2200 - Asrock Wolfdale1333-D667 - <click here for link>
  48. shrek02 - BSEL - E2140 - Acer Aspire L320 - <click here for link>
  49. afterburner - BSEL - E2140 - Asus P5PE-VM - <click here for link>
  50. yuna_lesca2006 - BSEL - E2220 - MSI G31 - <click here for link>
  
  
  
  

  
  
  Rock on!!!
  
  
  
  
  Goodluck and take care! ^_^
  
  Masunog sana processor nyo lolz.. joke!
  
  --------------
  
  - Edited Pics
  - Added E4300 BSEL Mod (800 to 1066FSB)
  - Added BSEL Guide
  - Added BSEL Note
  - Added BSEL Modded Celey D 3xx (533 to 800FSB)
  - Added BSEL Modded Celey D 3xx (533 to 667FSB)
  - Added VID Mod to my E4300
  - Added 1.4V VID Mod for E2180
  - Added Core2Duo VID Mod Calculator Link provided by Hoyas
  - Updated PinMod Club List and included screenie
  - Added 800 to 1333 BSEL Mod
  
  -- edited by jcmarfilph on Aug 30 2010, 11:13 PM

• Learning_mode on May 05, 2007 09:40 AM

  galing ah

• jcmarfilph on May 05, 2007 09:45 AM

  hehe
  
  try mo Fafs...
  
  its a Learning experience ^_^

• barukbok on May 05, 2007 09:47 AM

  cpuz na sir..

• bastard_06 on May 05, 2007 09:53 AM

  kakatakot naman gawin. hehe. pero ang galing!
  
  
  

• jcmarfilph on May 05, 2007 09:55 AM

  hehe kelangan malinaw ang mata nyo otherwise kelangan ng magnifying glass
  
  saka dapat di pasmado.. ^_^

• QuiRoGa on May 05, 2007 06:07 PM

  you can use a magnifying lens in determining the pin(s) positions and use a small flat-ended precision screw to paint / connect the required pins using conductive paint (did that to mod my Athlon XPs to Athlon MPs)...

• lexlukkia on May 05, 2007 06:16 PM - User is Online

  yo! sorry kung dito ko po ito mai-post.
  tonong ko lng kung paano ko matatanggal ung proc ko sa mobo safely. ang problem wl socket ung board, as in nakahinang ung pin ng proc sa mobo. paano kaya gagawin ko para matanggal ng maayos. kasi sira ng ung mobo. try ko gamitan ng soldering iron ung mga capacitor, ang hirap tunawin ng led ng ns mobo.

• QuiRoGa on May 05, 2007 06:21 PM

  lexlukkia Send Message View User Items on May 05, 2007 06:16 PM - User is Online
  yo! sorry kung dito ko po ito mai-post.
  tonong ko lng kung paano ko matatanggal ung proc ko sa mobo safely. ang problem wl socket ung board, as in nakahinang ung pin ng proc sa mobo. paano kaya gagawin ko para matanggal ng maayos. kasi sira ng ung mobo. try ko gamitan ng soldering iron ung mga capacitor, ang hirap tunawin ng led ng ns mobo.

  
  
  @lexlukkia
  
  kindly create another thread for that inquiry, baka hindi masagot ng maayos dito sa thread na ito... also better post the CPU/processor concerned and motherboard...

• dm on May 05, 2007 06:33 PM

  Hard pin mod should be done as a last resort to boost vCore, i.e. if motherboard doesn't have such option such as the mobo used by jcmarfilph.
  
  Note, this mod voids your warranty even if your processor works fine after the mod.
  
  Nehalem, I await your arrival...
  
  
  FanBoyReview™ (<click here for link>)
  Noobie on Intel® Processor? <click here for link>
  TEST
  (c)1999-2010 DM
  All rights reserve, All wrongs deserve

• jcmarfilph on May 05, 2007 11:56 PM

  hehe yup this will definitely void the warranty unless you know how to reverse the mod ^_^
  
  After all, Ive set my mind earlier, no matter what happen, any smoke, any boom, I will get a new processor.
  
  Behind my back telling me, ditch the Celey. ditch the Celey ^_^
  
  As a result,
  
  Got a new proccy now, will update this thread soon ^_^

• paui on May 06, 2007 12:07 AM

  @jcmarfilph
  
  nice job sir! i would like to do the E4300 mod as well. i just dun't know wher to get hold of the defogger repair paint. i saw yung silver conductive paint sa alexan pero i don't think worth it yung 8++pesos for 3 grams. also, may mga nagsasabi na not always working kung silver ang ginamit. :)

• paui on May 06, 2007 12:14 AM

  @jcmarfilph
  
  for vcore mod pala yung posted nyo. what i would like to try is yung BSEL mod (default fsb 800->1066) ;)

• jcmarfilph on May 06, 2007 02:03 AM

  @paui:
  
  thanks Paui
  
  I can do that too..
  
  will post that soon ^_^
  
  -- edited by jcmarfilph on May 06 2007, 02:05 AM

• QuiRoGa on May 06, 2007 02:07 AM

  nice job sir! i would like to do the E4300 mod as well. i just dun't know wher to get hold of the defogger repair paint. i saw yung silver conductive paint sa alexan pero i don't think worth it yung 8++pesos for 3 grams. also, may mga nagsasabi na not always working kung silver ang ginamit. :)

  yeah, 800php is really costly, however, it worked on my Athlon XPs (modded to Athlon MPs)...

• paui on May 06, 2007 02:07 AM

  @jcmarfilph
  
  ok, let me know if it works for you! btw, what conductive interface are you planning to use? :)
  
  -- edited by paui on May 06 2007, 02:12 AM

• paui on May 06, 2007 02:09 AM

  @Quiroga
  
  what i mean is hindi lahat successful yung mga gumamit ng silver for the E4300 BSEL mod :)

• jcmarfilph on May 06, 2007 02:12 AM

  @Quiroga:
  
  Well I can do that using just a pencil ^_^
  
  Before I was able to mod 2 Sempies
  
  Thoroughbred -> Athlon-MP (unlocked multi)
  Thorton ->Barton (256 -> 512 L2 cache)
  
  Guys you are free to post here any mod youve done to your LGA775...
  
  lets unite in this thread
  
  Unified Pin Mod Guide for LGA775 i.e
  
  i.e VCore, BSEL(FSB) or Multi perhaps? ^_^
  
  @paui:
  
  Silver/Aluminum Tape

• paui on May 06, 2007 02:16 AM

  @jcmarfilph
  
  where do you buy those? :)

• QuiRoGa on May 06, 2007 02:20 AM

  Well I can do that using just a pencil ^_^

  LOLz, pencil (graphite lead) won't work on polycarbonate surface, that's my initial dilemma until I found out that Alexan is selling such item...
  
  kudos to you, sir jcmarfilph, for sharing such feat (define feat: 1. An act; a deed; an exploit. <click here for link>)

• jcmarfilph on May 06, 2007 02:21 AM

  @Paui:
  
  Hardware? ^_^
  
  
  

• jcmarfilph on May 06, 2007 02:25 AM

  @Quiroga:
  
  looky here ^_^
  
  <click here for link>
  
  ahem this will be the last post regarding AMD Mod
  
  LGA775 modders bring it on... ^_^

• QuiRoGa on May 06, 2007 02:34 AM

  @jcmarfilph
  
  oki, however the pencil-trick has some problems like it wears off (mainly because the smooth polycarbonate surface) as some posters on the linked thread... and another issue is the pit on the cut bridges...
  
  now back to normal programming...

• jcmarfilph on May 07, 2007 10:06 AM

  any more takers? ^_^

• ianpogi on May 07, 2007 10:23 AM

  whoa! jcmarfilph, you've transformed to one serious modding mastah!.... or is it just because you already have a new proccy and would like to ditch that old cely.. LOL
  
  galing mo parekoy.. galing ng guts mo!

• jcmarfilph on May 07, 2007 10:36 AM

  @ian:
  
  Hehe been doin hardware mods "Ever since my world began" in TPC lolz..
  
  I could have hit 4GHz+ if I still have my beloved ASRock Twins..
  
  May issue sa PCIe lock ang 945G kasi.. =(
  
  so another hardware mod (BSEL) coming up
  
  P.S Bakit nakakapagbrowse ka, hindi ba bawal sa atin? lolz

• Hoyas on May 08, 2007 04:54 PM

  ahem.... BSEL mod nako pre...

• joel_galang on May 08, 2007 05:11 PM

  he! he! oks to a. Just a little sacrificial celeron and a lot of guts. c",)

• jcmarfilph on May 08, 2007 05:16 PM

  @joel_galang:
  
  atleast di masakit sa bulsa kung sakaling puputok lolz..
  
  well pinagaralan ko naman maigi yan bago ko ginawa yan..
  
  @hoyas:
  
  post mo na pre.. ^_^

• joel_galang on May 08, 2007 05:19 PM

  pwede ba pang-connect ung pangtagpi ng butas ng kaldero? ung nabibili sa palengke.

700 active users within the last 5 minutes, 440 members, 260 guests.
Our newest member is sddivorces
Click here to see online members.