-
septim08
on
24 Mar 09 @ 08:14 PM #
well yung last na linis ko, almost boiling, yung may konting bubbles na, so kailangan mittens para di ma paso habang nag shake rattle and roll...
-
knet370
on
24 Mar 09 @ 09:30 PM #
muriatic acid kaya? ahihi..
-
knet370
on
24 Mar 09 @ 09:58 PM #
epic fail yun..hihi
-
rodriv
on
24 Mar 09 @ 10:03 PM #
adobo?
-
knet370
on
24 Mar 09 @ 10:13 PM #
haha, yung nagpakita na nilinisan niya rad niya gamit datu puti yung sachet ba yun? lol
ito yung sinasabi kong epic fail.
@yelow
oks pa yan sir wag ka kabahan.
-
Raincloud
on
24 Mar 09 @ 10:17 PM #
arbor na lang water setup mo yeow, palitan mo na lang brand new hehe :)
-
rodriv
on
24 Mar 09 @ 10:26 PM #
anong brand nun pump nya(yeow)? ganda kasi.
-
septim08
on
24 Mar 09 @ 10:35 PM #
well yung current recommended is yung boiling/very warm distilled lang on most radiators ok na...
another thing we like to recommend is to try Prestone Radiator Flush, then rinse with warm distilled water... and rinse it good...
-
ariz_siete
on
24 Mar 09 @ 11:30 PM #
@yeow
-
ariz_siete
on
24 Mar 09 @ 11:34 PM #
ok na kahit hot water lang, much better wala na amoy yung vinegar tapos punasan mo ng maigi afterwards & much better balutin mo muna sya sa dry cloth & lagay mo muna sya sa room temp area madali yang magcorrode pag biglang moist kasi nahaluan na ng chemical e (vinegar)
-
Hondacity
on
24 Mar 09 @ 11:58 PM #
i\'m not sure if you\'ve seen this, but this is how i clean my rad.
-
rider_2hip
on
25 Mar 09 @ 01:15 PM #
yeow_z on March 24, 2009 10:02 PM
amfufu!! buti na lng binanlwan ko agad. at super tagal ko din binanlawan. pero shiet parin. laki damage ba talaga mabibigay ng vinegar bath sa rads at mga o-rings?
di naman since small surface lang sinayaran ng vinegar just remember na acidic ang suka kaya pwedeng mag react ang material ng o ring, kalasin mo pag naging brittle yung side surface nya yun saka mo sabihin na damage has been done pero as long na malambot pa din at hinde namaga ang oring you can still use it,,
always remember wag maging skeptic sa pagtutubig.
-- edited by rider_2hip on Mar 25 2009, 01:18 PM
-
knet370
on
26 Mar 09 @ 11:55 AM #
Yellow is ok, orange is gay. No offense meant
-
septim08
on
26 Mar 09 @ 12:24 PM #
well mag iba lang nga sa theme ng rig mo...
more amber/orangee color...
-
junkun13
on
26 Mar 09 @ 03:55 PM #
orange parang kay malik
-
kirklestat
on
26 Mar 09 @ 04:09 PM #
parang suka ang orange. :)
-
junkun13
on
26 Mar 09 @ 05:53 PM #
ito orange uv by malik
-
ariz_siete
on
26 Mar 09 @ 06:07 PM #
@yeow
paps maganda parin yung yellow tubes...hehe
-
junkun13
on
26 Mar 09 @ 06:13 PM #
clear yata tubes nya then feser uv orange ang coolant
-
junkun13
on
26 Mar 09 @ 06:25 PM #
kakayanin ba ng mcp355 un loop ko? cpu, 2x 4870x2, 160.1 and 360 rads? or 2 loops talaga? since meron na ko 2 loops. sikip kasi kapag 2 loops
bakit hindi?
-
junkun13
on
26 Mar 09 @ 06:42 PM #
kayang kaya nang pump mo
-
alex_tpc
on
26 Mar 09 @ 06:51 PM #
kayang kaya nang pump mo
i7 na yata si yeow_z. pag in-oc yon (and they\'re meant to be oc\'ed) malamang di na kaya. sobrang init ng i7 compared to his old quadcore.
two 355s in series baka pwede pa. or two loops para mas efficient but with the bigger rad on the i7 in fact (maybe that\'s just me :-).
-
junkun13
on
26 Mar 09 @ 06:58 PM #
i7 na yata si yeow_z. pag in-oc yon (and they\'re meant to be oc\'ed) malamang di na kaya. sobrang init ng i7 compared to his old quadcore.
two 355s in series baka pwede pa. or two loops para mas efficient but with the bigger rad on the i7 in fact (maybe that\'s just me :-).
dual loop ka dapat, nasa rad pa din kung gusto mo lumamig temps mo and of course ambient temps
-
alex_tpc
on
26 Mar 09 @ 07:14 PM #
just saw martin\'s liquid labs has a new site. his flow-rate estimator is here:
<click here for link>. he doesn\'t have data for the 4870x2 blocks pero pwede sigurong i-extrapolate kung kaya pa ng pump o hindi.
-
septim08
on
26 Mar 09 @ 08:36 PM #
martin has retired from testing stuff for Liquid Cooling...
that is just a mirror site.
yes most full cover blocks pwede mo extrapolate ang restriction.
generally kaya naman ng pump mag push ng water through the loop, yung pressure lang ang mag suffer pag sobrang daming blocks in 1 loop.
kaya yung sa iba na kasya naman 2 loops ang recommend, 1 cpu, 1 gpu.
-
junkun13
on
26 Mar 09 @ 10:16 PM #
pwede ba 2pumps in 1 loop? hehe
pwede pero not recommended
-
rodriv
on
26 Mar 09 @ 10:23 PM #
2 pumps same model(brand specs) in one loop? pwede ba? kulit ba?hehe
-
septim08
on
26 Mar 09 @ 11:37 PM #
parang four seasons na dapat yan... konting red nalang needed... hehehe... nakakak uhaw nga...
-
godjayson_23
on
27 Mar 09 @ 08:34 AM #
@alex
i7 na yata si yeow_z. pag in-oc yon (and they\'re meant to be oc\'ed) malamang di na kaya. sobrang init ng i7 compared to his old quadcore.
two 355s in series baka pwede pa. or two loops para mas efficient but with the bigger rad on the i7 in fact (maybe that\'s just me :-).
eto temps ko at corei7 920 stock clock
using gtx black ice 480 single loop
-- edited by godjayson_23 on Mar 27 2009, 08:36 AM
-
alex_tpc
on
27 Mar 09 @ 10:03 AM #
@godjayson_23: temps look good on stock/idle. anong ambient/room temp niyan?
now try on load using 2-hours occt or prime95 firing all 8 cylinders and keeping core temp on (or better yet, using real temp so you can see min and max temps during the run).
then try the same on 4.0ghz and see what happens :-). Well maybe don\'t go 4.0 immediately. try 0.3 to 0.5 ghz increments (increasing voltages as needed of course) and monitor max temps. go to next level only if temps are not too high.
then try oc\'ing the vc\'s as well :D.
