• Supports Long VGA Cards up to 400mm
•Install up to 10 fans – Superb Airflow
•Includes 1 x 12cm Black fan
•With cable routing management
•Pre-drilled CPU hole for easy mounting and removable of CPU cooler
Don't let the brown box deceive you and what is important is the inside ;)
Aerocool releases yet another great Cube case based from the popular Xpredator model. 3 variations will be available locally - the Avenger Blue, Avenger aka Iron Man and the plain stealthy Black.
Basic specification of the Xpredator Cube. It can accomodate both Micro ATX and Mini ITX motherboards with plenty of rooms for hard drives or SSDs. The said case is also compatible with multi-graphic cards type of system.
Let us start with the Xpredator Cube Avenger aka Iron Man which looks damn great with excellent Gold and Red paint job.
For the IO Panel part, you have two front built-in knob type fan controllers (15W max per channel) , 2x USB 3.0 ports and HD Audio output and Mic. Both sides lights up once your system is up and running.
Mesh finish for the front which provides better airflow inside the case.
On top, you have the Air Vents that open and close by moving the black switch found below. There is also a rubber part with Aerocool print name on it that can be used to hold your cellphone upon charging it with the Cube's front USB port.
Closer look on the Air vents once you open it up :)
Glossy red finish for the side panel with acrylic window. Peek a boo!!!
At the back specifically the upper area, you have fan mount holes which can hold 12cm or 14cm chassis fan. There are also ready cut-out holes for water cooling tubes and PCI slot mesh type covers that dissipates accumulated heat inside the case.
Moving on to the lower deck, you will find a removable PSU bracket for easy installation of a full size standard PSU. Included also is a 14cm rear fan with an option for mounting a 12cm chassis fan.
Interior look upon removal of the side panel. Clean and organized.
Motherboard mounting is positioned horizontally to protect from bends and allows the user to install tall type CPU Air coolers easily. Also, the mobo tray plate is removable for easy and faster installation of motherboards. It comes with cable management holes for cleaner and organized look.
Users also have an option to mount 2x12cm or 2x14cm fans at the front upon removing the included 20cm 500rpm low noise fan.
Checking out the interior top of the Avenger, you can actually install 1x 20cm fan. Removing the ODD rack opens up the whole are on top which users can mount 2x 12cm or 2x14cm fans or for the use of 240/280mm water cooling radiators.
That's it! Basically we already explored the whole area of the Xpredator Cube case and I must say that Aerocool did a great job on the design and thought of all the possible and easiest way of installing hardware components inside the case. I also included some actual photos of the other two Xpredator Cube variant which are the Avenger Blue and the Black. Check them out!!!
December 18, 2014 06:59 PM
- User is Online
mga sir anong case ba na mura na maganada palitan ko sana yung Aerocool stikerX one ko.. ang hirap kasi linisin lalo na yung harap... hinde kasi ata pwede tanggalin yung nsa harap ng case ko unlike sa VS-92 parang madaling madaling linisi.. kya hirap tanggalin ung mga alikabok.. ano kaya pwede ipalit