Forum Topic

ZyXEL P600 White

  • mga masters, meron po ba nakaka-alam ng username at password nito:


  • gusto ko sana magamit sa 8 port hub

    patulong naman po.

    salamat
  • Username: admin
    Password: 1234

    or

    Username: adminpldt
    Password: 1234567890
  • sir, ayaw e.
    di makapasok
  • bakit direcho sa hub? diba dapat from modem direcho sa router muna?
  • \'pag sa router: bridged mode

    hub: router mode

    kelangan ko po mai-router mode para sa hub
  • mga sir \'di kaya mali tina-type ko sa web browser para ma access modem

    eto po ni-type ko:227.127.20.129 na nakuha ko sa website na di ko na maalala.
  • pagkakaalam ko default is 192.168.1.1 pero ayaw pa rin.
  • 192.168.1.1 is the edimax router gateway IP address. kaya ayaw tanggapin password mo coz malamang sa edimax ka nag lo login at hindi sa modem.

    connect mo muna isang pc directly sa modem. then once nakaka internet na yung PC na yun, type sa command prompt, ipconfig /all tapos hanapin mo yung gateway IP address value. yan ang ilagay mo sa browser mo.
  • @ artsky

    na try ko na sir. modem to PC

    IP add: 112.205.115.48 ayaw pa din.

    def gateway: 112.205.0.1 ayaw din.
  • 192.168.2.1----edimax
  • up
  • connect the modem directly to PC then check the Default gateway (IPv4 Default gateway) under network connection properties. use that address to access it thru your browser.



  • ^^ make sure that your PC is set to Obtain IP address automatically.

    -- edited by demonoid724 on Jun 07 2010, 04:44 PM
  • @ demonoid

    na-try ko na sir. ayaw e.
  • ^^ try connecting the modem sa ibang PC or laptop... afaik 192.168.1.1 talaga yung default gateway IP address.. also try 10.0.0.1 if it works
  • Guys RE: Remote mangement sa router na to, kailangan ko ba i-off?

    By default naka set sa WAN, ibig sabihin ba noon pede nila gawan ng remote adjustment yung Router ko? May previous experience kasi ako na pinag-tripan net ng Smart Bro ko remotely so I\'m thinking if I should turn this one off.

    @all

    Sa Black Zyxel P-600 eto gumagana sakin

    Username: admin
    Password: 1234

    Sa White Zyxel P-600 eto naman

    Username: adminpldt
    Password: 1234567890

    @lester

    <click here for link>
    Nabasa mo na to?
    You have to manually set a static IP sa LAN mo before mo access yung Zyxel P-600 in bridge mode. During this time hindi ka makakapag-net while configuring it.
  • ^^ also try performing \"hard reset\" sa modem.. merong maliit na button sa likod para sa reset, push it using a pencil or paper clip.
  • @ all




    na-access ko na. salamat mga master
  • @ blue3

    sir, thanks sa link.
  • same problem, kaso sana yung ts pinost dito kung pano na-acces yung zyxel p600. para matulungan din ang tulad ko, at para di na magdouble post pa ng ganitong topic about zyxel p600. thanks.
  • i have a PLDT Zyxel P660R-D1 with V3.40(APG.3) | 11/05/2009 firmware. what will happen if i upgrade the firmware to (V3.40(APG.4)b4) 06/14/2010?
    <click here for link>

    the login/password adminpldt/1234567890 works but i have to set up a static IP address before i can access 192.168.1.1
  • strange, on the official zyxel website
    <click here for link>
    the latest firmware is P-660R-D1 3.40(AGE.4)C0 1/15/2010. the C0 is higer than the b4 designation but the date is earlier
  • So, which one is supposed to be newer?

    v3.40(APG.4)b4 06/04/2010

    or the

    v3.40(AGE.5)c0 05/07/2010

    Any ano yung pinagkaibahan ng APG vs AGE

    (in one series, I notice yung firmwares are APG.0 -- I think this is the firmware when originally supplied by PLDT)

    Could it be that the AGE series firmware is for the black models and the APG series model for the white models Or are they interchangeable?

    -- edited by dta on Jan 06 2012, 01:23 AM
  • just fyi people...

    i have both the black and white zyxel P-600 (P-660R-D1) adsl modem provided by PLDT... I just found out na mas matipid sa kuryente yung white... the white one consumes 3.3-3.4W while the black one consumes 4.4-4.5W on a full load (torrent download)...

    kala ko mas mataas yung konsumo nung puti kasi 12v 1a yung power adapter nya tapos yung sa itim 9v 1am, mali pala akala ko... yung puti na yung gagamitin ko.
  • mark_17,

    Thanks for that info (1-watt difference din pala, pero maliit lang naman 1 watt..)

    Do the 2 models perform similarly in terms of signal-to-noise and other metrics like attenuation? (assuming it\'s connected to the same DSL line for comparison testing).
  • Do the 2 models perform similarly in terms of signal-to-noise and other metrics like attenuation? (assuming it\'s connected to the same DSL line for comparison testing).

    black model:

    noise margin upstream: 8 db
    noise margin downstream: 31 db

    attenuation upstream: 23 db
    attenuation downstream: 40 db


    white model:

    noise margin upstream: 9 db
    noise margin downstream: 31 db

    attenuation upstream: 22 db
    attenuation downstream: 42 db

    which is better overall?
  • mga papz may 2 modem ako na P600 series ..(1) ano ibig sabihin pag naka down ang WAN ...pero yung LAN naman naka UP ...sa P660R-D1 Zyxel....
    napansin ko lang firmware version ng modem ay 2006 pa...pero yung (2) working ko na isa pang modem ay 2009 ...sa firmware kaya ito kaya ayaw makakunek sa internet ang isa kong modem.. o sira na? na-a-access ko naman pag ipinapasok ko ang password... sino kaya makakatulong?