Patulong naman po... mag proprogram daw po akong *6000 sa pabx that will allow phone to dial that number and that number will be forwarded to some certain number.
Patulong naman po.
Forum Topic
Anyone familiar with Siemens Hipath 4000 PBX Programming? Patulong naman
-
problem is wala yung manual bro :(
-
speed dialing lang sya bro
-
ngek, dapat alam mo yung PABX console nyan... mahirap kumapa nyan, yung sa Lucent Definity eh buwan kong pinagtiyagaan noon, LOLz...
-
@rizalnevado
bro ikaw ba yung na hire sa telephony engineer? -
may console ako di ko lanag alam ang specific commands for speed dialing sa siemens hipath 4000
-
may console ako di ko lanag alam ang specific commands for speed dialing sa siemens hipath 4000
that\'s the problem, you have to know the console, kasi doon ka mag-de-define ng setting... have you tried googling the web for the console/command manual? -
I google and still googling for the version 5 manual, wala pa din makita
@kizey, nde po ako ang telephone engineer pero they will charge us bigtime here just for the configuration of speed dial. -
paano na alng ang show all commands kung meron?
-
they will charge us bigtime here just for the configuration of speed dial.
are you referring to the supplier of the PABX system, talagang malaki mag-charge ang mga ganyan, per hour, hahahahahahaha... -
so may makakatulong ba?
-
google is your friend:
http://support.avaya.com/css/P8/documents/100011767
http://support.avaya.com/css/P8/documents/100014865
http://www.pbxinfo.com/hicom-hipath/25909-hipath-4000-programming.html
sa madaling salita:
http://www.google.com/search?q=Siemens+Hipath+4000+PBX+Programming&ie=utf-8&oe=utf-8&lr=lang_en -
@erj22
dude kanina ko pa ginagawa yan, salamat pero I need immediate help to those who already have the idea.
We\'re all IT and I guess we are wise enough to google things first. -
wala bang help that will show all commands?
-
Hi
You need Siemens HP 4000 software to configure the system
Install the software to the PC and you need a patch cord to connect to the Server (maintenance)
Open Hipath 4000 Software
Check the IP Address of your pc and the System (must be in range for direct connection) or if lan based check your ip setting
Press ctrl t and enter username: root (some use it) and your password (sometimes hicom or hipath depends on your admin rights.
afterwards
check for the ff command
dis-wabe; enter(check wether the *6000 is programmed as spd dials. if there is existing speed dials that you know you can copt how it is programmed by
reg-wabe: (if you dont know the next that yuou need to type do this
reg-wabe:? enter so you will know what the system need and you can fill
Next lrngz command or zrngz command
if not work on it try the ziel command
to display programmed item
dis-lrngz
dis-zrngz
dis-ziel
dis-actda
change command
cha-lrngz
cha-zrngz
cha-actda
many more
add- command
reg-command
many more. commands
save your changes