Forum Topic

Phenom II x6 1090T

  • eto stock cooler lang ginamit ko kasi di ako pinayagan mag palit ng after market cooler
    pero lahat ng kalaban naka after market cooler and liquid cooling...rules one na submit ang stock result no hard ware change :( kahit cooler man lang

    <click here for link>
    <click here for link>
    <click here for link>
    -- edited by ng_navarro on Mar 31 2012, 01:34 AM

    -- edited by ng_navarro on Mar 31 2012, 01:37 AM

    -- edited by ng_navarro on Mar 31 2012, 01:42 AM
  • Hello mga ka-Phenom X6 1090

    Just bought mine yesterday. And I must say okay sa performance. Though I have some issues, hope you can shed some light

    Alam ko na na maingay si stock HSF Hehe. Pero kahit naka full RPM na siya, at full load(doing stability test in AOD) si 1090T ko umaabot ng 60C and up >_<

    Planning to buy Antec Kuhler 620 or Corsair H60/H80 pero di pa kaya as of now. And is it possible na defective po procie ko?

    Will buy for now po a thermal grease, ano po preferred niyo?
  • ^ BTW, Idle temps ko po are at 42 and up >_<
  • ^ are you OC\'ed or stock which heat sink your using? is it stock?
  • ^ On stock speeds po and stock HSF din po :(
  • My Temps po while rendering on After Effects. From Cold Boot around 9AM




    -- edited by jamapeee on Apr 14 2012, 09:48 AM

    -- edited by jamapeee on Apr 14 2012, 09:53 AM
  • ^which motherboard your using...check mo muna yun temp sa bios if you want disable mo yun turbo core
    mainit sa pinas ngayon so maybe yun din yun reason...ako nga idel sa core on my 956BE is 54C on stock heat sink and speed
    pag burn test mo talagang iinit yan more than 60C but that is if more than 30 min of stress test
    try to flash to a newer bios for Thuban procee
  • Emaxx 785g FXN po yung board ko. with latest available BIOS (v1.1) supporting thuban po

    Upon boot po, seeing temp status from BIOS, starts from about 30C gradually increases and reaches upto 45C (then i just boot my OS)

    Yup, mainint nga po and possible factor din. Planning on re-applying thermal grease kaso can\'t find Arctic MX2, deciding on alternatives pa
  • naka tunic thermal paste ako same din if your ambient temperature is 30C you will get 40 to 45C sa bios and a little bit high sa AIDA64
    but if you can lower your ambient to 20 possible na you will be at 30 to 35C lang...
    kaya ko disable yun turbo ko kasi mainit but never akong umabot ng 65C max is 55C and ideal ko is 40 sometimes 47C sa afternoon

    But when i was in Dubai my idle is 25C coz my room is 24/7 19C cold...
    but yours ay umaabit ng more than 60C then it must be your board
  • Sa board po? in what possible reason po? mali yung readings ng sensor or may defect po ang board? :(
  • walang defect yun board its your sensor...try mo tapat sa aircon...as in nakatapat sa bugahan
    if temp lowered to 30 to 19 with in 15 to 30 min
    then mainit lang talaga sa room mo coz akin now walang case and still 51C sa core, full yun fan idle pa (X4 965BE)
  • Thanks sir ng_navarro :)

    Though di ko nagawa yung itapat directly sa aircon (masyado mataas hehe)

    Inside the airconditioned room, vcore set to 1.3, turned off turbo core, fixed rpm fan to 3900

    Idle temps @ 28C
    On Load temp @ 41C

    Mainit lang talaga dito samin... :)
  • 1090T so far is the best processor i got hold. Especially when i convert video files from raw format to mp4.
  • +1 kay goonting

    Same here, di ako nagsisi sa pagamit ko kay 1090T. Using it on After Effects and some non-resource heavy offline g
  • good day po sa lahat

    mga sirs pwede po ask ako ng help


    saan pa pwede maka bili ng phenom 2 x6 1090 na proc

    nag try na po ako search dito sa TPC pero wala na ako mahanap eh

    sabi nung iba phased out na raw


    please naman po help me where to buy

    2nd hand or bnew as long as its in good condition

    nag try na din ako post sa WTB


    baka po kasi dito ako mag post mas marami makaka tulong sa akin.


    thanks
  • guys paano niyo naayos yung wrong output of temperature sa HWMonitor?
    mobo ko is asrock extreme3
  • Morning! share ko lang po my 1090T :)

    CPU-Z


    <click here for link>

    Temp



    Clear Image <click here for link>

    -- edited by Panching on Sep 16 2012, 10:19 AM
  • mga boss anu pong heat sink ang bagay sa phenom x6

    --Deepcool Gamer Storm Heat Sink Fan
    --Deepcool Ice Blade Pro Heat Sink Fan
    --Deepcool Frostwin Heat Sink Fan

    right now po kasi stock gamit ko 47 to 65degress po kasi sya kaya balak ko bumili ng magandang heatsink..
    at arocool na casing.. ilang degress po kaya ang ibaba nya pagka deepcool napo ang heat sink ko thanks..
  • antec cooler 620 mura lang pero oks..
  • thanks po gustu ko po kasi maginvest na sa heat sink para no worry na sa mataglang gamit kahit magdamag mag games..
  • may nabibilhan pa nito ngayon sa market balak ko mag uprade ng ganitong processors? reply naman sa may nakaka-alam
  • sali po ako

    kakabili lang ng 2nd hand na x6 1090t procie




    former x4 965 user po ako

    unang napansin ko ay mas malamig stock settings ng 1090t compared to 965
  • kaya po ba ng Turbo mode ang stock fan ng 1090t?
  • San po ka ya nakakabile ng 1090t phenom dito sa pinas
  • parang wala na ata abang ka na lang ng 2nd hand sa ifs meeron nakapost
  • ito pa rin gamit ko now


    laban pa rin sa bf4
  • worth to upgrade na ba sa 1090T to FX 8320?

    for Gaming
  • Ano mobo mo @immortalkings ?
  • ^

    Gigabyte UD5 - 990FXA