-
BlackSunKR81
on
20 Sep 13 @ 12:53 AM #
san ba magandang bumili ng aracde stick na pasok sa 2k range?
Buhayin thread na ito!!! :-D
-
lonewolf2331
on
20 Sep 13 @ 09:41 AM #
as I have been saying before...
You can check second hand items for sale...
Now depends sayo ano talaga hanap mo...
IF you want good parts, price range is 3500-6000 for second hand all Sanwa sticks.
IF you want cheap sticks below 2k, the best one I can recommend is Icore, it\'s easily moddable if you know how to solder.
A stick in the 2k-3krange for second hand is the Hori Fightstick V3, fairly easy to mod as well if you know how to solder.
Facts about non-Sanwa sticks
Buttons will fail eventually
Joystick feel varies per manufacturer
-
anti_venom
on
27 Sep 13 @ 09:50 AM #
I have iCore Arcade Stick, gusto ko sana i-mod or ipa-mod.
what if ako ang gagawa, hindi ba ganun ka-complicated i-mod tulad ng ibang model? well kaya ko naman mag-solder, pero hindi pulido hehe.
saan din pwede bumili ng sanwa parts directly? para makatipid kahit papano hehe..
kung ipapa-mod ko naman sa iba how much kaya rough estimate? (1-stick and 8-buttons lang.)
thanks!.
-
lonewolf2331
on
27 Sep 13 @ 04:14 PM #
I charge 600 for modding services, parts not included.
Soldering new wires onto this is easy., stick cavity is large so it\'s easy to mod talaga.
Get wires and quick disconnects/.110 female terminals in raon/deeco
Desolder all the buttons, remove the crappy buttons, crimp the terminals onto the wires, solder on the wires in pairs, install the new sanwa buttons, connect the wires to the buttons.
3dsoj sells sanwa buttons at 150 each.
-
jangiksu
on
01 Nov 13 @ 08:03 PM #
mga idol newbie lang.
eto sana gusto ko gawin: custom arcade cabinet parang vewlix. pero ang nasa loob PC at xbox
pwede ba yun arcade stick ko na gagawin pwede sa pc at xbox at ps3? yun iba kasi binaklas yun Qanba q4 then ipapasak sa cabinet,
ok sana to kaso may kamahalan yun qanba. 7500 isa e. iniiisp ko if gumawa ako sarili, kaso ang problem yun pcb ata taawag dun???
yun pwede magswtich from pc to xbox or vice versa
thanks
-
lonewolf2331
on
01 Nov 13 @ 11:19 PM #
Eto yung hanap mong PCB if you want to build a custom arcade stick for PS3/PC/X360 it\'s called a PS30+
order here
http://www.play-asia.com/ps360-paOS-13-49-en-70-6m8z.html
or here
http://www.akihabarashop.jp/index.php?cPath=462&osCsid=1adcbc7f3b8d99114cca2d86a6a86c06
Wag ka lang sana ma tax
-- edited by lonewolf2331 on Nov 01 2013, 11:34 PM
-
jangiksu
on
02 Nov 13 @ 01:47 AM #
thank you sir sa reply...
have you seen yun mga arcade sa mga malls? sa robinsons Nova may arcade sanwa parts sila. xbox laman. gsuto ko sana magpagawa nun. gumagawa ka ata ng ganun sir? gusto ko magpagawa nfg ganito. aking lahat ng parts. gagawin mo na lang (pero if may parts ka mas maganda hehe). pero wala pako karpintero na gagawa nun cabinet.
let me know. thanks
look at this
-- edited by jangiksu on Nov 02 2013, 02:06 AM
-- edited by jangiksu on Nov 02 2013, 02:06 AM
-
lonewolf2331
on
02 Nov 13 @ 09:05 PM #
nope di ako yung gumagawa ng cabs, wala akong alam sa carpentry eh :)) hahaha
Modder ako but not yet a custom builder.
Kilala ko yung owners nung arcade setup na yan
-
lapastangan
on
22 Dec 13 @ 05:43 AM #
Mga bossing share ko lang \'yung sa \'kin. Pardon the rubbish outer. Hindi pa tapos eh... wala pang pintura hehehe.
-- edited by lapastangan on Dec 22 2013, 06:00 AM
-- edited by lapastangan on Dec 22 2013, 06:02 AM
-
cloud_str
on
22 Dec 13 @ 11:44 AM #
Maganda talaga ung sa Robinsons Nova ung mga arcade setup nila.. hehehe :)
-
MaikForte
on
09 Jan 14 @ 10:39 PM #
Mga bossing. Pa tulong nmn... San kya ako mkakabli ng pang Xbox 360? Napa Tekken kasi eh XD
-
lonewolf2331
on
09 Jan 14 @ 11:24 PM #
eto oh...
All sanwa parts na :D
Good na yan at that price kasi buttons pa lang 150 each na
http://www.tipidpc.com/viewitem.php?iid=27007665
-
jangiksu
on
11 Jan 14 @ 11:32 PM #
Post mo pic boss
-
qok123
on
02 Jun 15 @ 01:23 AM #
Mga boss meron po ba kayong alam na mabibilhan ng seimitsu ls-32 na stick?
Yung current stick ko kasi sanwa pero majority ng games ko mga vertical shooter
at di pasok yung deadzone ng sanwa para sakin.
-
hakz
on
02 Jun 15 @ 03:14 PM #
^ have you tried changing the gates?
-
qok123
on
04 Jun 15 @ 11:06 PM #
Natry ko na yung octogate pero parang lumaki lalo yung deadzone e,
kung wala akong mahanap locally paship nalang siguro ako ng
seimitsu ls-56
-
hakz
on
05 Jun 15 @ 03:48 PM #
try mo i-pm si 3DSOJ, not sure kung may stocks pa sya ng seimitsu parts though
-
lonewolf2331
on
26 Jun 15 @ 10:46 AM #
wala akong kilalang nag stock ng seimitsu parts locally.
Pag seimitsu order ako from US or Japan
I have these joysticks
Seimitsu LS-32-01 Installed in my Madcatz TE R1
Seimitsu LS-40-01 Installed in my Madcatz Soul Calibur 5 Edition
Seimitsu LS-58-01 Installed in my Hori Real Arcade pro 3 with PS-14-KN screw in buttons
Seimitsu LS-56 stock joystick found in Konami Hypserstick for PSX
Two Ascii optical(silent no contact) joysticks installed in Hori Real Arcade Pro 3 taken from An Ascii Justice PSX stick and Ascii Dreamcast Stick
I also did LED mods and PS4 conversion of my primary stick
Personally I prefer Seimitsu, but I now love my optical joysticks :)
@qok123 I recommend the LS-58 or LS-56 if you want a smal deadonel quicker engage, difference is in the stiffness of the spring
the LS-40 so far has the quickest engage out of all the sticks I\'ve used, it gives me problems in qcf motions sometimes
order from Focusattack if you have someone in the US
order from akihabarashop.jp if you want it direct shipping to the Philippines
-
qok123
on
21 Jul 15 @ 10:16 PM #
@lonewolf2331
Yeah ordered the LS-56 just got them today really big change from the JLF, used akibaharashop too very nice service from them.
Currently selling my Sanwa parts right now if anyone needs them:
http://www.tipidpc.com/viewitem.php?iid=37314558&mask=success
-
cold_as_eyes
on
21 Aug 15 @ 11:44 AM #
mga boss pa ot lang tanong ko lang sana ano ginagamit nyong software pag maramihan na games? plan ko kasi bumuo ng pc then convert sa arcade, pero naguguluhan ako ano ba iinstall na software
-
thedeathof
on
28 Sep 15 @ 04:53 PM #
mga sir alam nyo buh saan maka bili pcb for ps3 arcade stick..sira na kasi IC nang arcade stick ko i mo mod ko nlang sana..hanap ako pcb para ma mod ko sira ko na arcade stick.
-
lonewolf2331
on
03 Nov 15 @ 03:15 PM #
@cold_as_eyes
http://www.koenigs.dk/mame/eng/mamesoftware.htm
@thedeathof
Cheap solution, Cdrking USB pad, works on PS3, then do some padhacking wiring and soldering.
or order online
PS360+,
http://www.focusattack.com/akishop-ps360-multi-console-joystick-pcb/
or
Cthulhu
http://www.focusattack.com/toodles-cthulhu-multi-console-pcb/
-
espada04
on
26 Feb 16 @ 11:33 PM #
Got a CDRKing arcade stick(2-in-1 CSI Series), tig 880
First time ko kasi na gumamit ng stick para sa PC. Ganun ba talaga yung click sound? Medyo na lalakasan ako.
Pansin ko na may miss ng konti pag hadouken motion ako, & medyo mabagal siya pag double forward (-> ->) ako. May naka pag mod na ba neto?
-
hakz
on
02 Mar 16 @ 07:21 AM #
^ maybe post a link or pic of the stick?
backread ako, wew May 22, 2012 pa pala yung stick ko and it still works today. Sulit na yung binayad ko dito hehehe
Medyo clicky yung stick nyan sir wag tayo mag expect kasi low quality stick talaga eh. Pero kung gusto mo ng magandang quality stick, go for arcade sticks with sanwa parts :)
-
sleepygeepy
on
02 Mar 16 @ 08:28 AM #
^
Bumili din ako ng CDR-King arcade stick years ago nung naghahanap ako ng cheap joystick para sa Neo-Geo emulator. Ok naman at first pero nasira din after a few months. Nabugbog siya sa kakalaro ng kapatid ko ng Samura Shodown II at King of Fighers hehehe....
Yung bagong arcade stick nila mukhang mas maganda na ang build:
<click here for link>
Pero I think better to buy the Qanba / Sanwa sticks kung pang matagalan ang paggamit. Alam ko meron si 3dSOJ :-)
-- edited by sleepygeepy on Mar 02 2016, 08:29 AM
-
hakz
on
02 Mar 16 @ 11:07 AM #
^ ganyan yung nabili ko before na stick hanggang ngayon ayos parin hehe
-
j3yps
on
12 Sep 16 @ 12:46 PM #
Inviting everybody who share's the same interest and enthusiasm on Arcade/Fight Stick to join the newly created Facebook group:
Arcade Stick Aficionado Philippines
<click here for link>
-- edited by j3yps on Sep 12 2016, 12:47 PM